how to fix sinking office chair
What could be better when your boss says to take a leave to work from home? It gets easier when your chair understands your body. A comfy nice chair can make you feel comfortable. All those back pains go away simply while you sit on it.
However, even the best office chair for back pain can give you a bummer if it sinks. This usually happens when you use a chair for a long time.
If you're facing that problem right now, it's time for you to relax. No, you don't need to hire someone to get it fixed for you. Informers Geek team has got you covered. We'll show you how to fix sinking office chair easily and more effectively.
You're up for it? Follow these simple DYI steps.
Contents
- 1 How to Fix Sinking Office Chair
- 1.1 1.Using a Hose Clamp
- 1.2 2. Using a PVC Pipe
- 2 Wrapping Up!
How to Fix Sinking Office Chair
Fixing a sinking office chair is no easy task, we know that. However, we're going to show you two easiest possible ways to complete your task. You can either use a hose clamp or a PVC pipe to get the job done.
1.Using a Hose Clamp
So, we're going to talk about the hose clamp first and how you can use it to solve your problem. Go through these easy steps and fix your office chair right away.
Sliding the Plastic Tube
Office chairs have one common thing, plastic tubes. You'll find it over the extendable cylinder the chair comes with. Slide it in such a way that it goes either all the way up or all the way down. Keep doing this until you notice the metal cylinder is being exposed.
Adjust the Chair's Height
It's time for you to adjust the height of your chair. Now, you have to remember one thing though. After this repair is done, you won't be able to adjust the chair's height. Since this is the last time, you're going to do it, so make sure you set the height right. Make sure the seat is on the level of your knees as you stand.
Wrap a Hose Clamp
Get your hands on a hose clamp that's about ¾ inches long. You can easily find it in a hardware store. Now, it's time for you to loosen the screw you'll find on the hose-clamp.
Once you've unscrewed it, you have to pull the belt-end out. Make sure the clamp is wrapped perfectly around the cylinder. However, it's still not the right time to tighten it.
See If the Grip is Strong
No matter what, you have to make sure the clamp is very tight so that it can hold the chair up. You can wrap a strip over rubber or try wrapping few layers of duct tape around the cylinder. This will make sure the clamp has got a better surface for gripping the chair.
Tighten the Clamp
Once you're done, you've to slide the clamp so that it makes its way to the top of the cylinder. You can give it a double check to see if the chair has the right height. Pulling the clamp tight is the next thing you have to do. Lastly, rotate the screw in order to fasten it.
Test the Chair
Now that you've done everything perfectly, the chair won't be able to slide down passing the clamp. Remember, you won't be able to adjust the height anymore. If you've set the wrong height somehow, you have to move the clamp lower or higher.
2. Using a PVC Pipe
If you didn't find the hose clamp thing easy, you'll surely find using a PVC pipe pretty easy. Get to the steps below and you'll be able to fix your office chair in no time.
Measure the Cylinder of Your Chair
You'll see a plastic skirt that's covering the metal cylinder; pull it down. Hold a ruler horizontally across it and measure the diameter of the metal cylinder. Then, adjust the height of the chair perfectly, and while it has got the perfect height, measure the cylinder's length.
Get Yourself a PVC Pipe
Buy a PVC pipe from the nearest hardware store. Make sure it has got the same diameter as the cylinder. A pipe having 1.5 inches of diameter should be enough for almost all the cylinder types. However, make sure the pipe is straight enough.
Starting from the wheelbase of your chair, the pipe should be able to extend to the seat as the chair stays fixed at your desired height settings.
Cut the Pipe Using a Saw
After you've secured the pipe in a vise, cut the cylinder using a backsaw or a hack saw. Make sure you go from tip to tip. However, you'll have to do it on only one side. Cut it in such a way so that you can get a pipe that has a slit with it. It's not going to be two half-pipes.
As you cut the PVC pipe, don't forget to wear a respirator or a mask. This will prevent you from inhaling all those irritating particles.
If there's no vise around you or you don't have any cutting tool, you just have to leave the PVC pipe intact. Now, remove the wheels of your office chair. This will allow you to slide on the PVC pipe.
Snapping the Pipe
You see the plastic skirt on the chair? Pull it up or down and you'll be able to find the metal cylinder. Now bring the slit side of the pipe you just got and push it against the cylinder. Voila! That should keep the pipe snapped all around the cylinder.
This will prevent the chair from sliding down and keep it in one place. If you think the height of your chair needs to be a bit higher, you can raise it and span another slit pipe.
Wrapping Up!
See? It's not that tough, is it? Now that you know how to fix sinking office chair, you can solve your problem within minutes.
how to fix sinking office chair
Source: https://informersgeek.com/how-to-fix-sinking-office-chair/
Posted by: penachem1942.blogspot.com
0 Response to "how to fix sinking office chair"
Post a Comment